3:1 Adhesive Lined Heavy Wall Heat Shrink Tubing
The semi-rigid 3 to 1 ratio Heat Shrink is suitable for protecting electrical splices, terminations and joints that require additional sturdiness than standard shrink tubing.
|
|
3:1 Adhesive Lined Heavy Wall Heat Shrink Tubing
|
|
|
|
|
|
Variations
| Part Number |
Size |
Length (feet) |
| HS3-HW-0375 |
3/8" |
4 |
| HS3-HW-050 |
1/2" |
4 |
| HS3-HW-0875 |
7/8" |
4 |
| HS3-HW-150 |
1.5" |
4 |
| HS3-HW-220 |
2.2" |
4 |
| HS3-HW-300 |
3" |
4 |
More Information
| Technical Data |
| Operating Temperature |
IEC 216 |
-55C to +110C |
| Tensile Strength |
ASTM D 2671 |
≥14MPa |
| Tensile Strength after aging (158C/168hrs) |
ASTM D 2671 |
≥12MPa |
| Longitudinal Shrinkage |
UL 224 |
0 to -10% |
| Elongation at break after aging (150C/168hrs) |
ASTM D 2671 |
≥400% |
| Density |
ASTM D 2671 |
≥300% |
| Dielectric Strength |
ASTM D 792 |
1.05g/cm^3 |
| Volume Resistance |
IEC 243 |
≥20kV/mm |
| Eccentricity |
IEC 93 |
≥10^14cm |
| Copper Stability |
ASTM D 2671 |
>30% |
| Resistance to stress cracking (50C) |
ASTM D 2671 |
Pass |
| Water Absorption (23C/14days) |
ASTM D |
No cracking |
|
ISO 62 |
<0.15% |
| Thermoplastic Adhesive |
| Water Absorption |
ISO 62 |
0.2% |
| Softening Point |
ASTM D E28 |
85C |
| Peel Strength (PE) |
DIN 30672 |
4N/cm |
| Copper Stability |
ASTM D 2671 |
Non-corrosive |
| Resistance to Fungus and Decay |
ISO 846 |
Pass |
|
| |
