Order desk: 1-888-835-6467
10937 County 5
Harmony, MN 55939

Download Catalog (PDF) Blog Newsletter Twitter Facebook YouTube Channel
Heat Shrink End Caps & End Caps with Valves
Part Number: HSEC

The ideal heat shrink temperature for the end caps is around 275F (135C). Applying the heat shrink end cap can be simple and hassle-free.




Heat Shrink End Caps & End Caps with Valves
Heat Shrink End Caps & End Caps with Valves
Variations
Part Number Size (inches) ID (before shrinking) (inches) ID (after shrinking) (inches)
HSEC-0375 3/8 0.39 0.16
HSEC-050 1/2 0.55 0.18
HSEC-075 3/4 0.75 0.25
HSEC-100 1 1 0.31
HSEC-100-V 1 w/ Valve 1 0.31
HSEC-150 1-1/2 1.38 0.59
HSEC-150-V 1.5 w/ Valve 1.38 0.59
HSEC-200 2 2.17 1
HSEC-200-V 2 w/ Valve 2.17 1
HSEC-300 3 2.95 1.38
HSEC-300-V 3 w/ Valve 2.95 1.38
HSEC-400 4 3.94 1.97
HSEC-400-V 4 w/ Valve 3.94 1.97
HSEC-500 5 4.72 2.36
HSEC-500-V 5 w/ Valve 4.72 2.36
Features and Benefits
  • The End Cap is adhesive lined to bond with the heat shrink it overlaps
  • Hot melt adhesive seals and insulates in one step to speed installation
  • Adhesive lining will prevent moisture penetration, allowing for long term storage of cable
  • Forms pressure-tight seal on ends of communication and power cables
  • Shrink ratio of 3:1 insulates a wide range of diameters and irregular shapes
  • Cross-linked UV resistant material improves chemical and temperature resistance
  • 3 to 1 shrink ratio, so only 6 sizes are needed to cover a range of 0.16" to 5"
  • Continuous use temperature of up to 110 °C
  • Shrink temperature of 120-135 °C
  • Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
  • Capable of sealing the entire surface of a cable or wire
Specifications
Nominal Size (inches) ID (before shrinking) (inches) ID (after shrinking) (inches) Wall (after shrinking) (inches) Length (before shrinking) (inches)
3/8 0.39 0.16 0.08 1.34
1/2 0.55 0.18 0.08 1.77
1 1 0.31 0.09 2.76
1-1/2/td> 1.38 0.59 0.12 3.35
2 2.17 1 0.13 4.33
3 2.95 1.38 0.14 5.12
4 3.94 1.97 0.16 6.1
5 4.72 2.36 0.16 6.1
More Information
ORDER REF. NUMBER AS SUPPLIED (mm) After recovered (mm)       Cable
Standard length end caps D (Min) D (Max.) A (10%) L(10%) Dw (5%) Diameter
12/4 12 4 15 40 2.6 4 10
14/5 14 5 18 45 2.2 5 10
20/6 20 6 25 55 2.8 6 16
25/8.5 25 8.5 30 68 2.8 10 20
35/16 35 16 35 83 3.3 18 32
55 / 26 55 26 50 103 3.5 28 48
75/36 75 36 55 120 4 45 68
100/52 100 52 70 140 4 55 90
120/60 120 60 70 150 4 65 110
145/60 145 60 70 150 4 70 130
160/82 160 82 70 150 4 90 150
200/90 200 90 70 160 4.2 100 180


Technical Data :
PROPERTY TEST METHOD VALUE
Operating temperature IEC 216 -55 ℃ to +110 ℃
Tensile strength(psi) ASTM D638 > 14 MPa
Elongation at break (%) ASTM D638 > 400%
Density ASTM D792 1.05
Elongation at break after aging 150 / 168hrs > 300%
Dielectrict strength IEC 243 > 15kV / mm
Volume resistance IEC 93 > 10 Ω.cm